Climate control

Your home should feel right the moment you walk in.

Singapore demands constant cooling, but managing air conditioners room by room should not be a daily chore. Your aircon adapts to your routine, answers to your voice, and keeps running whether or not the internet is up.

Real controlTemperature, fan speed, swing and mode, not just on and off.
Two-way feedbackThe app shows what the aircon is actually doing, not what it was last told.
Runs locallySchedules fire on your own hub, so a dropped connection at 2am changes nothing.
Deep integration

Intelligent air-conditioning, properly done.

A smart plug or a generic infrared blaster gives you on and off. That is not climate control, it is a timer with extra steps.

Where a manufacturer opens up proper access, we integrate directly and you get the whole remote in the app, with the unit reporting its real state back.

Daikin iSmile

Deepest

Full integration over your local Wi-Fi, with no dependency on the internet. The app always reflects the actual state of the unit rather than the last command sent to it.

  • Power, temperature, fan speed
  • Horizontal and vertical swing
  • Fan and dry modes
  • Streamer air purification
  • Two-way feedback

Mitsubishi Electric

Deepest

Direct integration on compatible inverter units through a Wi-Fi module we fit during installation. Same depth of control, same two-way feedback.

  • Power, temperature, fan speed
  • Vertical swing, fan and dry modes
  • Wall-mounted: MSXY, MSY, MSZ
  • Cassette: PEY, PL, PLY, PCY
  • Two-way feedback

Every other brand

For units with no native integration, we fit an infrared blaster that learns your own remote in your home. Nothing goes to a cloud library, and no remote gets posted overseas.

  • On, off and temperature
  • Works with virtually any brand
  • Learned and stored locally
  • One-way, so no status feedback

Ceiling fans

Most ceiling fans in Singapore run on a radio remote. Through a Bond Bridge we bring speed, start and stop, and the fan light into the same app as everything else.

Buy the Bond Bridge · $210.00

Dyson purifier fans

Direct Wi-Fi integration with compatible models including the TP07, TP09 and Big+Quiet. On and off, speed from 0 to 100%, plus swing and auto modes.

Automation

Climate control works best when you forget it is there.

The point is not a nicer remote on your phone. It is a house that has already handled the temperature before you thought about it.

Cooling that follows people

Presence sensors notice a room has emptied and ease the aircon back, so you are not cooling an empty study all afternoon.

Schedules that actually fire

Say turn the aircon on at 8pm and it happens, because the schedule lives on the hub in your home rather than on a server elsewhere.

One goodnight

A single scene sets every bedroom to its sleeping temperature, turns off the living room fans and closes the curtains.

It knows the room

Temperature and humidity sensors feed real readings back, so automations respond to how the room actually is, not the time of day.

Why local processing matters here

Cloud systems keep your schedules on a remote server. If the connection drops at 2am, the instruction to turn the aircon off at 6am simply never fires. You wake up freezing, or to a bill.

Every automation runs on a hub inside your home, so schedules execute on time regardless of internet status. This is not hypothetical: Belkin Wemo, Insteon and Google Cloud IoT Core have all shut down and left owners stranded.

Real feedback, not guesswork

Most smart aircon setups use an infrared blaster, which only talks one way. It cannot confirm the unit received anything. If someone picks up the physical remote, the app has no idea and you are left guessing.

With the deep integrations, feedback runs both ways. The app shows the real temperature, mode, fan speed and power state at all times. No ghost commands, no arguing with the wall.

Compatibility

What we can control, and how far.

BrandIntegrationWhat you get
Daikin iSmile DeepestLocal Wi-FiTemperature, fan, swing, dry mode, Streamer purification, two-way feedback
Mitsubishi Electric DeepestWi-Fi moduleTemperature, fan, vertical swing, dry mode, two-way feedback
LG and ToshibaVirtual IntegrationTemperature 16-31°C and fan speed
All other brandsLocal infrared blasterOn, off and temperature
Dyson purifier fansDirect Wi-FiOn, off, speed 0-100%, swing and auto
Radio ceiling fansBond BridgeSpeed, start and stop, fan light
Works with the whole home

Climate does not live on its own.

Cooling is only half the answer. The rest is everything around it behaving sensibly at the same time.

Curtains and blinds that close as the afternoon sun hits, so the room stays cool without working the compressor harder.
Lighting that shifts colour temperature through the day alongside the cooling.
Presence sensors that know the house is empty and wind the cooling back on their own.
Voice control in plain language, including things like setting the bedroom to 24 degrees.
One app. One system. Every device working together.
Common questions

Climate questions, answered plainly.

How do you integrate aircon control into a smart home?

Three ways, depending on the unit. Daikin iSmile and compatible Mitsubishi Electric inverters integrate deeply, giving you temperature, fan speed, swing and mode with the unit reporting its real state back. LG and Toshiba go through Virtual Integration for temperature and fan speed. Everything else uses a local infrared blaster for on, off and temperature. We confirm which applies to your model before you commit.

Can I control my air conditioner without replacing it?

Almost always, yes. Nothing here requires a new aircon, rewiring or hacking the unit. Daikin and Mitsubishi units take a module fitted during installation; every other brand is handled by an infrared blaster that learns your existing remote in your home. The remote keeps working exactly as it does now.

Will my aircon schedule still run if the internet goes down?

Yes. Every schedule and automation runs on the hub inside your home, so a dropped connection does not stop the aircon turning off at 6am. Cloud systems keep schedules on a remote server, which is why an outage overnight means the instruction never fires. You lose remote control during an outage, not the automation itself.

What is the difference between an IR blaster and deep integration?

Direction. An infrared blaster talks one way: it fires the same signal your remote does and cannot tell whether the unit received it, so if someone uses the physical remote the app has no idea. Deep integration is two-way, so the app always shows the real temperature, mode, fan speed and power state. It also unlocks swing and dry modes an IR blaster generally cannot reach.

Can smart aircon control reduce my electricity bill?

It removes the waste rather than making the unit itself more efficient. Presence sensors wind cooling back in empty rooms, schedules stop the aircon running all night when nobody asked it to, and curtains closing against the afternoon sun mean the compressor works less. The saving depends on how wasteful the current pattern is, so we would rather look at your routine than quote a percentage.

Can I control ceiling fans as well as air conditioning?

Yes. Most ceiling fans in Singapore use a radio remote, which we bring in through a Bond Bridge for speed, start and stop, and the fan light. Compatible Dyson purifier fans integrate directly over Wi-Fi for speed and mode. Both end up in the same app and the same scenes as the aircon, so a goodnight scene can handle all of it at once.

Take control of your comfort.

New BTO, condo upgrade or a landed retrofit — climate control goes in without hacking or rewiring. We handle the design, the installation and the support afterwards.

Book a consultation